Sandy HVAC Company handles the heating and cooling work that keeps homes and commercial properties comfortable through every season in Sandy and across Salt Lake County. From a furnace that won't ignite on a January morning to an AC that stops cooling in the middle of a July heat stretch, we take the call, scope the job, and get it on the schedule. Doing it properly the first time is the whole point.
The work covers the full range: AC repair and service, furnace and heating repair, heat pump repair and installation, full HVAC system installation and replacement, ductwork repair and sealing, thermostat and smart-control installation, indoor air quality and air filtration, seasonal maintenance, and emergency calls for no heat and no cool. Residential and commercial properties both. Dependable service. A price agreed before we start. Local HVAC know-how.
When you call, you get straight answers about your furnace, AC, and ductwork. The scope and the price are settled on the call before anything is booked.
Call (385) 542-3665 and we will take care of it.
The homes and systems in this area have their own demands, and the work reflects that. Sandy sits at the base of the Wasatch Range, which means winters that push heating systems hard and summers that put real load on air conditioning. A service call here is not the same as one in a mild-weather market, and the diagnostic work accounts for that.
On the cooling side, we handle AC repair and service for central air systems and ductless mini-splits. When an air conditioner is running but not cooling, blowing warm air, freezing up, or shutting off before the house reaches temperature, the diagnostic visit checks refrigerant, airflow and controls all checked before a verdict. That sequence matters because the same symptom can have several causes, and jumping to a fix before ruling out the others costs the customer money and time.
On the heating side, we cover furnace repair and service, heat pump repair and installation, and boiler and hydronic heating service. A furnace that short-cycles, blows cold air, or won't ignite gets a full diagnostic before any parts are quoted. Heat pumps, which handle both heating and cooling in a single system, get the same treatment: refrigerant levels, airflow, and controls all reviewed before a recommendation is made.
Beyond the equipment itself, we handle ductwork repair and sealing, thermostat and smart-control installation, and indoor air quality work including air filtration and air purifier installation. Property managers and business owners dealing with commercial HVAC repair or replacement are part of the scope too. Give us a call and we will take care of it.
Sandy winters are cold and they last. A furnace that short-cycles, blows cold air, or won't ignite is not a minor inconvenience when overnight temperatures drop well below freezing. The heating work we handle includes furnace repair, furnace not heating, furnace won't ignite, and emergency no-heat calls. We also cover boiler repair and hydronic radiant heating service for properties running that kind of system.
For no-heat emergencies, calls are answered every day from 6:00 AM to 11:00 PM. If the heating system goes down during those hours, call and we will get the job on the schedule. The diagnostic covers the components most likely to be behind the fault: ignition, heat exchanger, blower, controls, and the connections between them. Call now and we'll set up your appointment.
Sandy summers bring consistent heat, and an air conditioner that is running but not cooling makes a hot house worse by the hour. Common faults we diagnose and repair include AC not cooling, AC blowing warm air, AC freezing up, AC leaking, AC making unusual noise, and central air systems that keep shutting off before the space reaches temperature.
A diagnostic visit on a cooling call typically covers the evaporator coil, condenser, compressor, refrigerant charge, and airflow through the system. Evaporator coil cleaning and condenser service may be part of what the visit involves, depending on what the inspection finds. The customer is told what was found before any repair work begins.
Call (385) 542-3665 for a quote.
A heat pump handles both heating and cooling, which makes it a practical fit for Sandy's climate range. The same unit that keeps a home cool in summer reverses cycle to heat it in winter, and when it stops doing either job properly, the diagnostic checks refrigerant, airflow, and controls before any recommendation is made.
We handle heat pump not heating, heat pump not cooling, heat pump stopped working, heat pump installation for new systems, and heat pump replacement when the existing unit has reached the end of its service life. A tune-up visit covers the same diagnostic points and is worth scheduling before the season changes. Call and we'll get the air running right.
Making comfort simple is most of what the job is, and the ductwork, thermostat, and air quality work is where that shows up most clearly in day-to-day living.
Leaky or poorly sealed ducts reduce system efficiency and create uneven temperatures from room to room. A room that never quite cools down or warms up is often a duct problem rather than an equipment problem. We handle duct repair, duct sealing, ductwork inspection, and full ductwork replacement where the existing runs are too far gone to seal effectively.
A thermostat upgrade changes how a system runs without touching the equipment itself. We install programmable thermostats, smart thermostats, and replace thermostats that are no longer reading temperature accurately or communicating correctly with the system. Thermostat wiring is part of the installation scope. For homeowners who want more control over how and when the system runs, a smart thermostat installation is a straightforward upgrade with a real effect on how the system performs.
Indoor air quality work includes air filtration installation, whole-home air purifier installation, and air scrubber installation. Seasonal maintenance scheduled around your calendar is part of how we keep filter changes and air quality checks from falling through the cracks.
Call (385) 542-3665 and we will set up a visit.
Sandy sits at roughly 4,500 feet at the base of the Wasatch Range, and the elevation and geography shape what heating and cooling systems have to do here. Winters are cold and sustained, with overnight temperatures that regularly drop below freezing from November through March. Summers are hot and dry, with afternoon temperatures that put consistent load on air conditioning through July and August. Spring and fall are short.
That climate range means systems here run hard at both ends of the year. A furnace sized for a mild winter is undersized for Sandy. An AC unit sized without accounting for the heat load on a south- or west-facing home in July will run continuously and still fall short. When a system is being replaced or installed, the sizing calculation accounts for the local conditions: elevation, orientation, insulation, and the temperature swings the system will be asked to handle.
The short shoulder seasons also mean there is a narrow window for pre-season maintenance. Scheduling a furnace tune-up in October and an AC tune-up in April puts the work ahead of the season rather than in the middle of it. Call now and we'll set up your appointment.
We know schedules shift, so we keep your booking flexible, and seasonal maintenance is where that matters most. A tune-up visit before the heating season and another before the cooling season catches the faults most likely to cause a breakdown mid-season, before the system is running at full load.
A furnace tune-up covers the igniter, heat exchanger, blower motor, filter, and controls. An AC tune-up covers refrigerant charge, evaporator and condenser coils, airflow, and the electrical contacts and controls that manage how the system starts and stops. A heat pump tune-up covers both the heating and cooling functions in a single visit.
What the visit finds is explained before any repair is quoted. If the system checks out, the customer knows that. If something needs attention, they know what it is and what it will cost to address it. Scheduling around the customer's calendar is part of how the visit works.
Call (385) 542-3665 for a quote on a seasonal maintenance visit.
What makes this service different is straightforward: when you call, you get a price before anything is scheduled. The call covers what the visit includes, what it costs, and what the diagnostic will look at. There is no ambiguity about what you are booking.
The diagnostic visit is where the real work of scoping a repair begins. The technician who comes out checks the components relevant to the reported fault, works through the likely causes, and tells the customer what was found before any repair work starts. That sequence applies to residential calls and commercial calls alike. A property manager calling about a rooftop unit gets the same process as a homeowner calling about a furnace.
Code-compliant work. Clear diagnosis. Pricing set out up front.
Pricing for a repair, a replacement, or a new installation is confirmed on the call. The customer knows the rate before the visit is booked, and they know what the visit covers.
Call (385) 542-3665 and ask what it covers. You get a straight answer.
The service area covers Sandy and the communities around it across Salt Lake County. That includes Draper, South Jordan, Riverton, Herriman, Midvale, Murray, West Jordan, and Cottonwood Heights. Residential properties, rental units, and commercial buildings across this area are all part of the scope.
Salt Lake County covers a wide range of housing types, from newer construction in Herriman and Riverton to older homes in Murray and Midvale where ductwork and equipment may not have been touched in years. The work is the same regardless of property type: a clear diagnostic, a price before anything starts, and the job done to the code that applies here.
For customers across the south end of the Salt Lake Valley, we are the call for AC repair, furnace repair, heat pump service, system replacement, and everything in between.
Older homes in neighborhoods closer to the valley floor often have ductwork and equipment that has not been serviced in years, which changes what the diagnostic needs to cover. Newer construction in areas like Herriman and Riverton tends to have more recent equipment but can have installation or airflow issues that show up early. Either way, the visit starts with a full inspection of what is actually there before any recommendation is made.
We work with homeowners, renters whose landlords have authorized a call, property managers overseeing multi-unit buildings, and commercial accounts ranging from small offices to larger retail and light-industrial spaces. The diagnostic approach is the same regardless of customer type: inspect the system, identify the fault, and confirm the pricing before any work starts. Salt Lake County's mix of housing stock and commercial properties means we see a wide range of system types and ages.
Sandy sits at roughly 4,500 feet at the base of the Wasatch Range, and that elevation affects how heating and cooling systems perform. Furnaces sized for lower-elevation conditions can fall short on the coldest nights, and dry mountain air drops indoor humidity to levels that affect comfort and building materials through the winter. Those factors are part of how we approach sizing, diagnosis, and equipment recommendations in this area.
If the repair requires a part that is not available for same-day completion, we explain that on the visit and let you know what the next steps look like. You are told what was found, what is needed, and what the timeline and pricing look like before anything is ordered or scheduled. We do not leave a job open-ended without giving you a clear picture of where it stands.
For jobs that take more than a single visit, the scope and the next steps are explained at each stage before work continues. If something found during the job changes what is needed, that is communicated before the work proceeds. You are not handed a bill at the end that reflects decisions made without your input.
The quote starts on the call, where the job is scoped based on what the system is doing and what the visit will cover. For a repair call, the diagnostic visit is priced before it is scheduled. For a replacement or installation, the scope is confirmed before any equipment is ordered. The customer knows the rate before the visit begins, not after.
After any repair or installation work is done, the system is run through its operating cycle to confirm it is performing the way it should. That includes checking airflow, temperature output, and controls to make sure the repair addressed the actual fault. If something is still not right, it is identified before we leave rather than reported by the customer afterward.
Heating, cooling, ductwork, and everything that keeps the system running: that is what we handle for homes and commercial properties in Sandy and across Salt Lake County. We are available every day from 6:00 AM to 11:00 PM, including for emergency no-heat and no-cool calls.
Code-compliant work. Clear diagnosis. Pricing set out up front.
Call (385) 542-3665 for a quote. Call and we'll get the air running right.
(385) 542-3665